How to Remove Varnish From Carpet?

Vanish impresses best when you apply it to wooden tiles or furniture. However, it can be your worst nightmare if it spills on your carpet. Since varnish glues onto wood surfaces, removing it can be pure leg work. However, that’s not unachievable either, and here’s how you do it.

how to clean varnish from carpet

Steps to Remove Wet Varnish from Carpet

There are numerous ways how to remove varnish from carpets, such as varnish removers or specialized adhesives. However, the minimalist version saves you your bucks. Here’s how you can do it:

What You Need

  • Paper towels
  • Sponge
  • Large spoon
  • Isopropyl alcohol
  • Mild detergent

Procedure

Scooping the Vanish

Using your spoon, scoop away as much vanish as possible, ensuring that you don’t spread it further or widen the patch. If the varnish has already been absorbed into the material, use a paper towel to dab on the patch. But be sure gentle when applying pressure to prevent pushing it further inside the fabric.

Apply Isopropyl Alcohol

Use another clean paper towel to soak the patch with Isopropyl alcohol. Simple fold it and use one corner to apply the liquid. Make sure you dip the towel into the alcohol and soak it before blotting it on the patch. Or, if possible, you can leave the towel for about 2 minutes until it dissolves the varnish.

Rinse With Warm Water

Soak a sponge with warm water and wring it to remove excess water. Then press it gently on the vanish patch to allow complete rinsing before drying the patch with a dry paper towel. If a visible patch remains, please repeat this step until it’s completely clean, or you can jump to the next step.

Clean with Mild Detergent

Put ½ tablespoon of mild detergent in a cup of warm water, mix until it’s even with a foamy solution.

Dip the sponge and apply the detergent on the patch, scrubbing in gently rounded motion until it assures you that it’s clean. That should take you less than a minute.

Afterward, use a clean, dry paper towel to blot up the moisture before rinsing with clean water using the sponge.

How to Remove Dried Vanish from Carpet

Removing dried carpet can be an uphill task, requiring extra effort. However, you can do it with enough patience and concentration. Since it’s already dried and craved, you might have to scrape it away before cleaning it. Here’s how you do it:

What You Need

  • Rubbing or Isopropyl alcohol
  • Scoop or rubbing knife
  • Paper towels
  • Sponge
  • Warm water

Procedure

Scrape Away the Dried Vanish

Scratch and remove as much varnish as possible using your scoop or rubbing knife. You can still use a vacuum cleaner to suck the crumbs to get the scale of your effort as you proceed.

Soak the Patch with Rubbing or Isopropyl Alcohol

Soak a paper folded paper towel in rubbing or Isopropyl alcohol before dabbing on the stained surface. Ensure that you cover the entire patch before leaving it for about 10 minutes until the varnish loosens. Then blot up the stains by pressing the paper towel gently against the carpet.

Rinse the Patch and Wash with Detergent

Use a soaked sponge to rinse the patch with clean, warm water. You can dab on the surface or gently press the sponge on the patch. Pour a few drops of detergent and rub using the sponge in a rounded motion. Afterward, use a clean and dry paper towel to remove the moisture and dampness.

Conclusion

Removing vanish from carpet can be some leg work, but it’s entirely achievable. However, it’s possible if you’re well familiar with the proper ways to do it. Be sure to follow this step-by-step guide to remove staining, vanish and restore your carpet’s initial glitter.