How to Dry Wet Carpet Without Vacuum?

Carpets add beauty, warmth and comfort to any home. To make a carpet last longer, it is vital to learn how to preserve and keep it dry at all times. We often rely on the latest, most effective appliances to dry our carpets completely.

However, not all homeowners own a vacuum cleaner. In this article, we will learn how to dry a wet carpet without a vacuum while keeping your home fresh and avoiding mold, bacteria and mildew.

how to keep carpet dry without vacuum

Ways to Dry a Wet Carpet With no Vacuum

Without a vacuum, the key to drying your carpet is to remove as much water as possible in a short time. Here are a few ways how:

Using fans and hair driers

These two pieces of equipment encourage evaporation of moisture. You can use only one or both at the same time. Using both takes a shorter time to get your carpet dry. You can use the ceiling fan, add your household fans and your hair drier all together in these few steps:

Step 1: Point the fans towards the wet carpet until you notice some drying.

Step 2: Check the floor and carpet padding to make sure they aren’t still sopping wet.

Step 3: Reduce as much wetness as possible on the floor and carpet padding. Strategically point your fans and hairdryers around the wet area and encourage as much drying as possible.

Step 4: If it is warm outside, you can open the windows for more humidity to escape. Using a dehumidifier also helps.

Give the carpet some time to dry up. If you lack some of these devices, you can rent professional dehumidifiers and air movers from a store.

Air drying your carpet outside

This is exceptionally efficient after a leak or flooding.

Step 1: Use a carpet sweeper or dry towels to remove excess water from the carpet. This will help with lessening the drying time.

Step 2: Carefully carry your carpet outside and hang it in an open space with maximum air floor. Please wait for it to dry.

In cases of excess water on your carpet, it is good to take it outside to reduce the risk of mildew and mold forming. It can be smelly and ruin your floor surface and lead to illness.

Using baking soda

Backing soda gets rid of excess moisture and prevents mildew from forming.

Step 1: Using towels or a carpet sweeper, remove as much water as possible from the carpet. Avoid applying too much pressure when using the carpet sweeper as you may damage the fiber on the mat.

Step 2: Now that the carpet is less soaked, pour as much baking powder on the wet areas you need to be covered.

Step 3: Wait a little bit for at least 12-15 hours. It will get rid of all the moisture.

Step 4: After the carpet is dry and the baking soda is properly soaked inside the fibers, blow out the carpet with a fan.

The Dehumidifier

A dehumidifier is one of the best ways to dry your carpet thoroughly. They help significantly without using a vacuum. Always turn it on when done with any of the above methods, and it will help get more moisture struck inside faster.

Always make sure it is not set too high. When high temperatures and dampness combine under the carpet, it encourages bacteria growth.